ZinParts: Replacement belts and other parts for broadcast, professional and vintage VTRs and VCRs

Zin! VTR Works has parts available for a number of common VCRs, such as these high-quality replacements for Sony 3/4″ Umatic recorders:

ZIN-ZinPart-Z-3-672-737-01

ZIN-ZinPart-Z-3-672-737-01-Sony BVU-VO Loading Ring Belt-Replaces Replaces Sony Part 3-672-737-01 on Sony BVU-950,  VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

ZIN-ZinPart-Z-3-672-737-01-Sony BVU-VO Loading Ring Belt-Replaces Sony Part 3-

ONE ZIN LOADING RING (Threading Ring) BELT. 

Replaces Sony Part 3-672-737-01

For Sony BVU-950, 900, 920, VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

$10.00 plus any applicable tax and shipping

ZIN-ZinPart-Z-3-653-387-00

ZIN-ZinPart-Z-3-653-387-00-Sony BVU-VO-Cassette Elevator Belt-IMG_9777

Replaces Sony Part 3-672-737-01 Sony BVU-950, VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

ONE ZIN CASSETTE LOADING ELEVATOR BELT.

Replaces Sony Part 3-653-387-00

For Sony BVU-950, 900, 920,  VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

$10.00 plus any applicable tax and shipping

ZIN-ZinPart-VO-FF-REW-TIRE

ZIN-ZinPart-VO-FF-REW-TIRE replaces Sony-VO-Series Fast forward / Rewind tre

ONE ZIN REPLACEMENT for Sony VO SERIES FF/REW TIRE

ONE ZIN REPLACEMENT for Sony VO SERIES FF/REW TIRE

For Sony VO-series and VP-series 3/4″ Umatic recorders and players.

$10.00 plus any applicable tax and shipping

ZIN-ZinPart-Z-3-668-785-00

ZIN-ZinPart-Z-3-668-785-00, ONE FF/REW BELT Replaces Sony Part 3-668-785-00

ZIN-ZinPart-Z-3-668-785-00, ONE FF/REW BELT Replaces Sony Part 3-668-785-00 for Sony VO Series inc. VO-98xx, 96xx, 50XX, VP-7640, 7240, others

ONE ZIN REPLACEMENT FF/REW BELT

Replaces Sony Part 3-668-785-00

For Sony VO Series including  VO-98xx, 96xx, 50XX, VP-7640, 7240, others

This ROUND belt avoids the twisting problem square belts have over time, becoming twisted, and stressed as a result, which leads to failure.

These round belts from Zin! VTR Works have been installed in heavy-use environments for more than a year with no replacements required.

$10.00 plus any applicable tax and shipping

ZIN-ZinPart-Z 3-718-758-01

ZIN-ZinPart-Z 3-718-758-01-ONE AIR DAMPER  FOR Sony BVU-950, ALSO FITS  VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

ZIN-ZinPart-Z 3-718-758-01-ONE AIR DAMPER FOR Sony BVU-950, ALSO FITS VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

ONE AIR DAMPER  FOR Sony BVU-950, ALSO FITS  VO-98xx, 96xx, 50XX, VP-7640, 7240 and others

ZIN-ZinPart-Z 3-718-758-01-Air Damper-010

The Air Damper improves flutter performance.  Replace missing Air Dampers on your BVU-900, 920 or 950, or add it to units that never had the air damper’s benefits like the Sony VO-98xx, 96xx, 50XX, VP-7640, 7240 and other Sony 3/4″ Umatic VCRs.

Slides on.

$18.00  plus any applicable tax and shipping.

We’ll be adding pictures and more items to this page and shortly, and will have items available for sale through the new Online flashscan8.us Moving Image Tools and Technology Store! So, bookmark this page or contact us using the link below and ask to be notified when the MIT&T Store goes on-line.

Zin! VTR Works has recently supplied a brand-new replacement motor for original equipment on an Ampex AVR-3 Quad VTR.

We can supply other parts including Pinch Rollers for various machines.

We’re taking orders now for a new batch of replacement Ampex Quad pinch rollers, made to Ampex specifications including durometer (hardness/softness) of the rubber.

We’re also working on being able to supply replacements for Sony 3/4″ pinch rollers, which are becoming or have become unobtanium from Sony and other distributors.

We need to build up a large order to make this possible, and to do so at a price that works for folks.

Use the Contact Page link below and tell us what machines you need Pinch Rollers for in the “What other product needs do you have?” box.
 How are your Pinch Rollers doing?

Quick Roller Condition test:

If you take your thumbnail and push into the rubber of the roller, it should go in, but when you pull your thumbnail away the indentation should disappear.

If it doesn’t disappear, the rubber is too soft. If you can’t make an indentation, it’s too hard.

How will ZinRollers be different from what else you may find?  Ken advises:

These would be of the proper durometer so that the tape can make a slight depression in the rubber.

That allows the roller to contact the capstan shaft above and below the tape so that the tape is moved by the pinch roller contacting the back side of the tape… rather than the capstan shaft driving the recorded surface of the tape as happens when the roller is too hard.

Correct durometer as noted above helps avoid tape slippage and video errors, increased capstan roller pressure, additional wear on bearings, etc.

These replacement rollers would be ground to final specifications with new bearings installed, so that the results are concentric and the correct diameter so you won’t have issues with flutter or speed.

These rubber rollers stay cleaner longer than replacements made from materials such as polyurethane that may be available.  Ken tried polyurethane rollers in customers machines (in one case, a large duplication facility) and heard complaints that operators were having to stop work to clean the poly rollers about every fourth tape. Not good, especially on cassette-based units.

Ken supplied and installed rubber pinch rollers, which resolved the problem and gave significantly longer times between the need to clean the rollers.

As you may know, Polyurethane is used to make Particle Transfer Rollers (PTRs) used on film transfer equipment to do exactly that… transfer particulate matter like dust off the film and onto the roller. We sell those for use with film scanners.

New video heads or assemblies may be available from some manufacturers.

flashscan8.us is also an authorized representative for Videomagnetics, which is the world’s last rebuilder of 2″ Quad VTR head assemblies, and supplies refurbished upper drums and scanners for a range of broadcast 1″, 3/4″, Betacam/BetacamSP/Digital Betacam and Panasonic DVCPro recorders.

For more information or to order, click on our Contact Page and let us know how to reach you and what parts you’re specifically interested in.

Contact us for Service, Parts and Consultation on Videotape Recorder Modifications and Videotape Migration Systems.

flashscan8-dot-us logo-Moving Image Tools and Technology-600x200.pngCEO: Ted Langdell
(530) 301-2931  ted@flashscan8.us
www.flashscan8.us               209 East 12th Street, Marysville, CA 95901

Posted in 2" Quad (Broadcast format), 3/4" Umatic, Accessories, EIAJ 1/2" Reel to Reel, Parts, Supplies, Video Equipment, Video Equipment Service, Video Recorder Parts and Sourcing, Video Recorder Service, Video Recorders and tagged , , , , , , , , , , , .